Ok, so at that point it looks exactly like a camera that never had an external pack? Guess I’ll have to make and keep a list of which have external packs and which do not. Wish you guys could sense that an external plug was in, and report that external pack is depleted - for the future if possible.
that is what it does, it senses any voltage higher than 6Volts as external) and shows it as EXT OK, or EXT LOW. When its OK or LOW and you have your battery setting at "4D" its on the internals. The solar panels have a internal battery that is approx 7.4 volts. the ^ d packs are 9 volts. Doing it any other way would require more cost and subsequently a higher retail cost. I recommend external power on everything and 4D internal on every unit, this is the most efficient and trouble free way to run the system.
it will drop in level but its hard ot predict how much, anything currently under 20 will certainly be challenged, you will need to try it when the time comes.
yeah i figured it was place dependent but wanted to ask.
i would turn it off in your camp, this is likely a glitch in camp i reported to the page designer.
As in turn off surveillance?
yes and wait until tomorrow to see if you camera comes back online, also check to see when the last time your cell unit checked in. This could related to a connection issue with your cell unit and not something in camp.
I do show a failed cell connection. Can’t say I’ve ever noticed it before so I’m not sure when it was. How long will the home cam show data of a failed connection?
as long as its been active, 1 failed connection isnt typically something to be worried about , multiples or high percentage is .
I'll see what happens over night. I turned off surveillance. I can't say I've ever noticed the "cell response reject" before. Never had a reason to look at it. The last time it updated was 4:34 this morning. We'll see what happens.
How often is the cell cam supposed to connect and update?
I’ll give it a try tonight. Thanks!
