Hack and Squirt

Seen this and wanted to share a tip I learned this past year. I too like to use the blue dye to tell where and if I have sprayed, especially if I have some help with me. I first bought the blue dye marketed for spraying applications. I’ve since started buying the blue dye meant for ponds and lakes. I can buy a gallon of it for a lot less per ounce this way. Hope this helps for those that use a dye.
 
Torton RTU red is triclopyr based. Pretty sure it has residual effect. Some say they don't have a problem. Some do. I use chemical to clearance vines from trees. The vines make roots into the trees and can send chemicals into them.

A double girdle of hack n squirt with plain old diesel can do pretty good on many species.

OVerall hack n squirt can be done with triclopyr or a mix of piccloram , 2,4D, and gly. PRetty sure thats Tordon RTU green.

Angling a chainsaw inward and making the channel deeper in the middle can make a great hack n squirt for large trees if needed.
 
Never saw much need for a marker when I was using a regular hatchet. It's pretty obvious they got whacked. But I finally made me a dedicated H&S hatchet to try this time. Basically cut a hatchet head on both top and bottom, leaving a longer "tooth" maybe 2.5" wide. The cut off flats acting as a stop. Makes a nice little pocket the same depth every time. I found those cuts are a much less obvious and easier to miss. Worked great on small/medium trees. Big old ones with deep craggy bark, less so. Had to make more hacks that usual to make sure it was enough.
 
Never saw much need for a marker when I was using a regular hatchet. It's pretty obvious they got whacked.
Agreed. We only used blue dye when we were basal spraying. Most of our H & S was done on TOH of 1" dia. or bigger. For the smaller dia. sprout-sized ones, we lopped those off and sprayed the stubs immediately. TOH can take over entire areas if not dealt with. They spread by underground roots and by seed (birds).
 
Back
Top