Recent content by Snow Hunter

Does anyone know if you can use the old G and K cell antennas on the new L series Tracks cameras? I damaged one of the antenna on my tracks camera clearing brush.

I have 3 sun/shade solar panels out right now that have been out for 55 days so far and no issues. I use Rayovac High Energy batteries in the cameras as well (these are the only batteries I use and I buy them in bulk).

You can also use the big solar panels that are good for shady areas. https://www.scheels.com/p/cuddeback-battery-power-bank/70086810003.html?gclid=CjwKCAjws7WkBhBFEiwAIi168xPZ5-PP0-OJGrr0MjlWbQj23JB8SZq4zDyU_DupTpOezwoux8U_ExoC7_IQAvD_BwE&src=hardlines

The t-post clamps are ok. I usually just make a post out of a big limb or branch and dig it in the a posthole digger and mount to those. There is also a genius mount that is already on a post. This is a good i option if you are not worried about theft and don’t have cows in the area...

Two of the networks I have are on properties between 40-80 acres. On these I have 3-5 cameras, and for me, that is enough. As previously stated, you will be fine with 16 or 32GB cards. You can probably set your link count higher, at 100 or higher if these aren’t over bait/feeders. I recommend...

😂 probably! I buy my Rayovac D batteries in bulk! https://www.ebay.com/itm/325645604019?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_HgYoDlcSBG&sssrc=2349624&ssuid=qboi07vEQyS&var=&widget_ver=artemis&media=COPY

Another item to consider is battery life. I have every camera on a solar panel and/or a powerbank. Since I don’t like to touch the cameras during season, battery life is key. If you are not running backup power, set your delay longer to conserve vattery life (until you break down and buy solar...

The J and G cameras are limited to 32GB cards, but the L cameras are good to 256GB (as noted above). I have been using Cuddelink cameras for 4 years now and I mostly use 16 and 32GB cards with no issues. I have only had a card fill up once (I replace the cards in January or pull the cameras) and...

I have 4 systems and one of them has 18 cameras on it. I like to set my delay at 5 seconds for any camera on a path, that way if multiple deer are traveling together (as they often do), you catch more than just the first deer. On any camera over a scrape or salt, I set the delay at 15 seconds...

WhenI finally do update my L cameras, Can I do them piecemeal, or do I need to get them all at once? It is a big network and it takes quite a while to get to all of the cameras.

John, I see that my Tracks cameras updated to 1.4.0 firmware. Do I need to get that on all my Cuddelink L series cameras as well? I already updated them once with 1.3.0 and they seem to be working great.

I also have multiple home cameras on my camp account and I use the same channel for all of them in case I switch cameras between networks. Each of my networks are 10+ miles apart, so they don’t interfere with each other.

They don’t have the click from the filter, as the new L cameras have a new security grade IR-cut filter for silent operations.

Do you have an ETA on the Black Flash L cameras?

Correct, but I needed to pick when I set it up. Are you suggesting that it will bounce back and forth? Perhaps defaulting to the carrier I choose when I registered the camera?