Recent content by Barker

Thanks for the help. I ended up clearing my SD Card, there were a few hundred pics on it, ran a reset, and changed the rate to 1 hour and received a Success when I ran a cell test. It's armed and I'm letting it work. Is there anything I need to do when hooking a solar panel to the G-5109? I...

So I got the Cuddelink Cell Home up and running. It's activated and connected to all cameras on the channel. The system worked for the first day sending 42 pics overnight. The next day I stopped receiving any pics, updates, reports, etc from the Cell Home. When I checked it, it was flashing...

I was using the old G series homs reciever. I initially powered it down but I just changed it from HOME to REPEATER and changed the location from 001 to 012 to put it at the end of the list. I was able to get it to establish a Link Level of 99, assuming it linked to the Cuddelink Cell next to it

I just bought a Cuddelink Cell to upgrade from my home receiver and was wondering how to swap out the current receiver that is set to HOME to the cuddelink cell that I need to make HOME. I powered down the current receiver and set the cuddelink cell as HOME on the current channel as all my...

Do these new L series still have that audible click from the filter? Looking to upgrade from my J cams that are so loud.

Loader and R1 unfilled tires. I don't forsee me having any issues pulling the drill but figured I'd ask first rather than find out later. Good reminder to lift the drill before turning. I have some sweeping turns at the field edge but it shouldn't be a problem. Luckily Land Pride provides an...

On wheels

The county has a 706NT I was wanting to try out this year but was wondering if a Yanmar YT359 can do the job? It's a little over 4,000lbs, 4wd, and 59hp. I'm planting nwsg and beans across 15 acres, fairly flat land. Anyone have experience with this size of drill on a compact tractor?

I pulled the SD card and tried a new card. I cleared the memory and when I go to arm the camera I get a "Check SD" error for a few seconds then it goes away. The camera operates fine, there just seems to be a corrupted pic stuck in que. That isn't recognized. I tried this with multiple cards...

So it seems like I have a picture from one of the 10 linked cameras that is corrupted or something and keeps trying to come through. The camera is working fine and sending new, uncorrupted pictures too. I've probably been sent this picture over 100 times in the past few days. Any idea on how to...

Ouch, I think I'll need to keep these out of their bedroom then and place them high and back a ways from the target areas. Luckily the does seem to not bust out too often but not taking the chance with a target buck.

Has anyone else had issues with an audible 'click' coming from there cuddelinks? I have j-series black flashes and all of them seem like its the IR filter making an audible click when it switches. The deer definitely notice it and stare right at the camera. Anyone have any fixes to quiet it down?

I really appreciate the great feedback I'm seeing. Looks like my best opportunity will be to get out there this summer and take it slow. We really don't get a good deep freeze anymore during our winters so there's a good chance of getting stuck then. Looks like I need to choose which excavator...

We had a timber harvest last year to improve the habitat on our property. The crew seemed to had done a decent job being late summer when they finished up. Fast forward to this past spring to where I noticed the skidder and heavy equipment they used had plugged up a drainage ditch that cuts...

I have an old clover field that I want to change over to switchgrass next year. The plan is to brush hog it low now and get a couple good sprayings in (Gly, 2-4D) going into fall. I would then frost seed the switch during winter and spray Simazine and Gly again early spring. This will be in...