Search results

If you go into the camera settings online, you can select Advanced, and then select Day time lapse, and pick 12 hours and you will get one or two pictures each day. These will likely be blank, but at least you know the camera is working. I will do this sometimes in an important camera that...

Looks like clearing the card finally kicked in.

So, my Tracks cameras just received an over the air update to Gen 3.2, and one of them has been sending non-stop old pictures from the memory card, since about 4pm, I am up to about 500 old images. Every 2-3 minutes, I get another batch of 30 old pictures! There is no option to clear the queue...

Is this the same firmware that will fix the issues on my tracks cameras as well? CS told me that an update was coming over the air for them or I could update the firmware manually.

@john volkman I have been struggling with the new Gen 3 firmware. I have two active networks, the first, has a G home camera on 9.0.0 and 15 L cameras on 3.0.0 forward and CL version 3.0.7. This system works fine. I did have several cameras that started having issues with their memory cards...

Which one is the link and cell antenna?

I keep having challenges with the new Generation 3 Cuddelink System. I have a network that is on an L home camera and Cuddelink keeps pushing new updates and every time it does, I keep losing remote cameras (they get disconnected or have some glitch). I have replaced multiple memory cards to get...

Does anyone know if you can use the old G and K cell antennas on the new L series Tracks cameras? I damaged one of the antenna on my tracks camera clearing brush.

I have 3 sun/shade solar panels out right now that have been out for 55 days so far and no issues. I use Rayovac High Energy batteries in the cameras as well (these are the only batteries I use and I buy them in bulk).

You can also use the big solar panels that are good for shady areas. https://www.scheels.com/p/cuddeback-battery-power-bank/70086810003.html?gclid=CjwKCAjws7WkBhBFEiwAIi168xPZ5-PP0-OJGrr0MjlWbQj23JB8SZq4zDyU_DupTpOezwoux8U_ExoC7_IQAvD_BwE&src=hardlines

The t-post clamps are ok. I usually just make a post out of a big limb or branch and dig it in the a posthole digger and mount to those. There is also a genius mount that is already on a post. This is a good i option if you are not worried about theft and don’t have cows in the area...

Two of the networks I have are on properties between 40-80 acres. On these I have 3-5 cameras, and for me, that is enough. As previously stated, you will be fine with 16 or 32GB cards. You can probably set your link count higher, at 100 or higher if these aren’t over bait/feeders. I recommend...

😂 probably! I buy my Rayovac D batteries in bulk! https://www.ebay.com/itm/325645604019?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_HgYoDlcSBG&sssrc=2349624&ssuid=qboi07vEQyS&var=&widget_ver=artemis&media=COPY

Another item to consider is battery life. I have every camera on a solar panel and/or a powerbank. Since I don’t like to touch the cameras during season, battery life is key. If you are not running backup power, set your delay longer to conserve vattery life (until you break down and buy solar...

The J and G cameras are limited to 32GB cards, but the L cameras are good to 256GB (as noted above). I have been using Cuddelink cameras for 4 years now and I mostly use 16 and 32GB cards with no issues. I have only had a card fill up once (I replace the cards in January or pull the cameras) and...

I have 4 systems and one of them has 18 cameras on it. I like to set my delay at 5 seconds for any camera on a path, that way if multiple deer are traveling together (as they often do), you catch more than just the first deer. On any camera over a scrape or salt, I set the delay at 15 seconds...

WhenI finally do update my L cameras, Can I do them piecemeal, or do I need to get them all at once? It is a big network and it takes quite a while to get to all of the cameras.

John, I see that my Tracks cameras updated to 1.4.0 firmware. Do I need to get that on all my Cuddelink L series cameras as well? I already updated them once with 1.3.0 and they seem to be working great.

I also have multiple home cameras on my camp account and I use the same channel for all of them in case I switch cameras between networks. Each of my networks are 10+ miles apart, so they don’t interfere with each other.

They don’t have the click from the filter, as the new L cameras have a new security grade IR-cut filter for silent operations.